CONECTIVIDAD Cisco RV 120W Wireless-N VPN Firewall
Descripción
Take Basic Connectivity to a New Level The Cisco® RV 120W Wireless-N VPN Firewall combines highly secure connectivity - to the Internet as well as from other locations and remote workers - with a high-speed, 802.11n wireless access point, a 4-port sw
Routing
- Static routing
- RIP v1 and v2
- Inter-VLAN routing
Layer 2
- 802.1q -based VLANs
- 4 active VLANs (1 to 40 4 range)
Network
- Dynamic Host Configuration Protocol (DHCP) server, DHCP relay agent
- Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP)
- DNS Proxy
- IGMP Proxy and multicast forwarding
- Dynamic Domain Name System (DynDNS, TZO)
- Network Address Translation (NAT), Port Address Translation (PAT), Network Address Port Translation (NAPT), Session Initiation Protocol Application Layer Gateway (SIP ALG), NAT traversal, one-to-one NAT
- Multiple DHCP pools
- Port Management
IPv6
- Dual-stack IPv4 and IPv6
- Multicast Listener Discovery (MLD) for IPv6 (RFC27)
- Stateless address auto-configuration
- DHCP v6
- Internet Control Message Protocol (ICMP) v6
Security
Access control:
- IP access control lists (ACLs)
- MAC-based wireless access control
Firewall:
- SPI firewall
- Port forwarding and triggering
- DoS prevention
- Software based DMZ
Content filtering:
- Static URL blocking or keyword blocking
Secure management:
- HTTPS
- Username/password
802.1X
- Port-based RADIUS authentication (Extensible Authentication Protocol [EAP], Protected EAP [PEAP])
Certificate management
- X.50 v3 certificates
- Certificate upload using PEM format
VPN
- QuickVPN tunnels for remote client access
- IPsec site-to-site tunnels for branch office connectivity
- Triple Data Encryption Standard (3DES), Advanced Encryption Standard (AES) encryption
- Message Digest Algorithm 5 (MD5)/Secure Hash Algorithm (SHA1) authentication
- Dead Peer Detection (DPD)
- IPsec NAT traversal
- VPN pass-through of PPTP, L2TP, IPsec
Quality of Service
- 802.1p port-based priority on LAN port, application-based priority on WAN port
- 4 queues
- DiffServ support
- Traffic Metering
Management
- Simple Network Management Protocol (SNMP) versions 1, 2c and v3
- Event logging: local, syslog, email alerts
- Firmware upgradable through web browser. imported/exported configuration in text format
- Simple browser-based configuration (HTTP/HTTPS)
- UPnP, Bonjour
- Network diagnostics with packet captures
Performance
- NAT throughput: 5 Mbps
- 00 concurrent sessions
- VPN throughput: 25 Mbps
Wireless LAN Specifications
Table 2 gives the wireless specifications for the Cisco RV120W.
Table 2. Wireless LAN Specifications
Feature
Description
WLAN hardware
IEEE 802.11n standard-based access point with 802.11b/g compatibility
Radio and modulation type:
- 802.11b: direct sequence spread spectrum (DSSS)
- 802.11g/n: orthogonal frequency division multiplexing (OFDM)
- 2 omnidirectional 1.8 dBi gain external antennas
Operating channels:
- 11 in North America
- in most of Europe
- Automatic channel selection
Transmit power:
-802.11b: 17 dBm +/- 1.5 dBm
- 802.11g: 15 dBm +/-1.5 dBm
- 802.11n: 12.5 dBm +/- 1.5 dBm
Receiver sensitivity:
- 802.11b: 11 Mbps@ - 0 dBm
- 802.11g: 54 Mbps @ -74 dBm
- 802.11n: 270 Mbps @ -71 dBm
Wireless Domain Services (WDS):
- Allows wireless signals to be repeated by up to 2 compatible receivers
Wi-Fi Multimedia (WMM):
- WMM with QoS (802.11e)
- WMM Power Save (WMM-PS)
Active WLAN clients
- Up to 64 clients
Service Set Identifiers (SSIDs)
- Up to 4 separate virtual networks
Wireless VLAN
- Support for SSID to VLAN mapping with wireless client isolation
WLAN security
- Wi-Fi Protected Access (WPA2, 802.11i)
System Specifications
Table 3 gives the system specifications for the Cisco RV 120W.
Table 3. Table 3 System Specifications
Feature
Description
WAN
/0 Mbps Fast Ethernet WAN port
LAN
4-port /0 Mbps switch with support for VLAN and QoS
WLAN
Built-in high-speed 802.11n wireless access point
Physical dimensions and weight
- W x D x H = 5. 1 in. x 5. 1 in. x 1.34 in. (150 mm x 150 mm x 34 mm)
- Weight: 1. lb (0.5 kg)
Power
12V 1A
Certification
- FCC Class B
- CE
- IC
- Wi-Fi
Environmental operating range
- Operating temperature: 0° to 40°C (32° to 4°F)
- Storage temperature: -20° to 70°C (-4° to 158°F)
- Operating humidity: % to 85% noncondensing
- Storage humidity: 5% to 0% noncondensing
Configuration Requirements
Table 4 lists the configuration requirements for the Cisco RV 120W.
Table 4. Configuration Requirements
Feature
Description
Network adapter
PC with network adapter and Ethernet cable
Web-based configuration
Web browser
Ordering Information
Table 5 gives ordering information for the Cisco RV 120W.
Table 5. Ordering Information
Part Number
Product Name
RV120W-A-NA
Cisco RV 120W Wireless-N VPN Firewall (USA)
RV120W-E-G5
Cisco RV 120W Wireless-N VPN Firewall (Europe)
RV120W-N-AU
Cisco RV 120W Wireless-N VPN Firewall (Australia)
RV120W-A-CN
Cisco RV 120W Wireless-N VPN Firewall (China)
RV120W-A-CA
Cisco RV 120W Wireless-N VPN Firewall (Canadian French)
RV120W-A-AR
Cisco RV 120W Wireless-N VPN Firewall (Argentina)
Routing
- Static routing
- RIP v1 and v2
- Inter-VLAN routing
Layer 2
- 802.1q -based VLANs
- 4 active VLANs (1 to 40 4 range)
Network
- Dynamic Host Configuration Protocol (DHCP) server, DHCP relay agent
- Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP)
- DNS Proxy
- IGMP Proxy and multicast forwarding
- Dynamic Domain Name System (DynDNS, TZO)
- Network Address Translation (NAT), Port Address Translation (PAT), Network Address Port Translation (NAPT), Session Initiation Protocol Application Layer Gateway (SIP ALG), NAT traversal, one-to-one NAT
- Multiple DHCP pools
- Port Management
IPv6
- Dual-stack IPv4 and IPv6
- Multicast Listener Discovery (MLD) for IPv6 (RFC27)
- Stateless address auto-configuration
- DHCP v6
- Internet Control Message Protocol (ICMP) v6
Security
Access control:
- IP access control lists (ACLs)
- MAC-based wireless access control
Firewall:
- SPI firewall
- Port forwarding and triggering
- DoS prevention
- Software based DMZ
Content filtering:
- Static URL blocking or keyword blocking
Secure management:
- HTTPS
- Username/password
802.1X
- Port-based RADIUS authentication (Extensible Authentication Protocol [EAP], Protected EAP [PEAP])
Certificate management
- X.50 v3 certificates
- Certificate upload using PEM format
VPN
- QuickVPN tunnels for remote client access
- IPsec site-to-site tunnels for branch office connectivity
- Triple Data Encryption Standard (3DES), Advanced Encryption Standard (AES) encryption
- Message Digest Algorithm 5 (MD5)/Secure Hash Algorithm (SHA1) authentication
- Dead Peer Detection (DPD)
- IPsec NAT traversal
- VPN pass-through of PPTP, L2TP, IPsec
Quality of Service
- 802.1p port-based priority on LAN port, application-based priority on WAN port
- 4 queues
- DiffServ support
- Traffic Metering
Management
- Simple Network Management Protocol (SNMP) versions 1, 2c and v3
- Event logging: local, syslog, email alerts
- Firmware upgradable through web browser. imported/exported configuration in text format
- Simple browser-based configuration (HTTP/HTTPS)
- UPnP, Bonjour
- Network diagnostics with packet captures
Performance
- NAT throughput: 5 Mbps
- 00 concurrent sessions
- VPN throughput: 25 Mbps
Wireless LAN Specifications
Table 2 gives the wireless specifications for the Cisco RV120W.
Table 2. Wireless LAN Specifications
Feature
Description
WLAN hardware
IEEE 802.11n standard-based access point with 802.11b/g compatibility
Radio and modulation type:
- 802.11b: direct sequence spread spectrum (DSSS)
- 802.11g/n: orthogonal frequency division multiplexing (OFDM)
- 2 omnidirectional 1.8 dBi gain external antennas
Operating channels:
- 11 in North America
- in most of Europe
- Automatic channel selection
Transmit power:
-802.11b: 17 dBm +/- 1.5 dBm
- 802.11g: 15 dBm +/-1.5 dBm
- 802.11n: 12.5 dBm +/- 1.5 dBm
Receiver sensitivity:
- 802.11b: 11 Mbps@ - 0 dBm
- 802.11g: 54 Mbps @ -74 dBm
- 802.11n: 270 Mbps @ -71 dBm
Wireless Domain Services (WDS):
- Allows wireless signals to be repeated by up to 2 compatible receivers
Wi-Fi Multimedia (WMM):
- WMM with QoS (802.11e)
- WMM Power Save (WMM-PS)
Active WLAN clients
- Up to 64 clients
Service Set Identifiers (SSIDs)
- Up to 4 separate virtual networks
Wireless VLAN
- Support for SSID to VLAN mapping with wireless client isolation
WLAN security
- Wi-Fi Protected Access (WPA2, 802.11i)
System Specifications
Table 3 gives the system specifications for the Cisco RV 120W.
Table 3. Table 3 System Specifications
Feature
Description
WAN
/0 Mbps Fast Ethernet WAN port
LAN
4-port /0 Mbps switch with support for VLAN and QoS
WLAN
Built-in high-speed 802.11n wireless access point
Physical dimensions and weight
- W x D x H = 5. 1 in. x 5. 1 in. x 1.34 in. (150 mm x 150 mm x 34 mm)
- Weight: 1. lb (0.5 kg)
Power
12V 1A
Certification
- FCC Class B
- CE
- IC
- Wi-Fi
Environmental operating range
- Operating temperature: 0° to 40°C (32° to 4°F)
- Storage temperature: -20° to 70°C (-4° to 158°F)
- Operating humidity: % to 85% noncondensing
- Storage humidity: 5% to 0% noncondensing
Configuration Requirements
Table 4 lists the configuration requirements for the Cisco RV 120W.
Table 4. Configuration Requirements
Feature
Description
Network adapter
PC with network adapter and Ethernet cable
Web-based configuration
Web browser
Ordering Information
Table 5 gives ordering information for the Cisco RV 120W.
Table 5. Ordering Information
Part Number
Product Name
RV120W-A-NA
Cisco RV 120W Wireless-N VPN Firewall (USA)
RV120W-E-G5
Cisco RV 120W Wireless-N VPN Firewall (Europe)
RV120W-N-AU
Cisco RV 120W Wireless-N VPN Firewall (Australia)
RV120W-A-CN
Cisco RV 120W Wireless-N VPN Firewall (China)
RV120W-A-CA
Cisco RV 120W Wireless-N VPN Firewall (Canadian French)
RV120W-A-AR
Cisco RV 120W Wireless-N VPN Firewall (Argentina)
